HP9000inks.com :: Print head recovery

Print head recovery

Print Head Doctor - recovery device for the clogged nozzles of your print heads

Print Head Doctor model 14
Print Head Doctor model 13
Print Head Doctor model 12
Print Head Doctor model 11
Print Head Doctor model 10
Print Head Doctor Mobile
PHD mobile app control



PHD Android app on Google Play

Print Head Doctor is the set of hardware and chemicals capable of recovering clogged nozzles of solvent-based, UV and water-based print heads. The system utilizes the action of pre-heated chemicals pumped through a print head in both directions combined with ultrasonic vibrations.

  • 90% recovery rate.
  • Cleans even severely clogged heads.
  • Remote control from Android devices via Bluetooth (except model M).
  • Automatic cleaning cycles.
  • Reverse flushing and Thru-head flushing capabilities with pressure and vacuum.
  • Vacuum-assisted forward flushing keeps print heads safe.
  • Models 12, 13 and 14 automatically maintain the set pressure and the fluid temperature.
  • Compact and rugged design.
  • Ease of use: instructions are available on video and PDF.
  • Ease of servicing: new modular design allows quick replacement of the filters and pumps.
  • Self-diagnostics and safety provisions (models 10, 11, 12, 13 & 14).
  • Money-back guarantee.
  • 1-year warranty.
Print Head Doctor Models Comparison Sonic Reverse Flushing Caps

Filter and Pumps Replacement

 
Customer Testimonial
...This machine only cost around £1500 but has saved me just on the first instance £12,000. I was delighted, and wanted to put the record straight. ITS A FANTASTIC MACHINE AND IT DOES EXACTLY WHAT IT SAYS IT WILL DO AND WILL SAVE YOU A LOT OF MONEY. MONEY WELL SPENT!

Print Head Doctor 14:

  • High Flow (1200ml/min) and high pressure of 25 psi allow cleaning of several print heads at once, with a large number of nozzles. This machine can recover 2 Kyocera KJ4 heads simultaneously.
  • All Swiss pumps deliver high performance and reliability.
  • Four input filters and two main filters protect all the pumps in the machine and provide a high flow.
  • Complete control of the machine from Android devices.
  • Automatic pressure control with the digital pressure readout.
  • Fluid cooling and temperature control.
  • Supports Sonic Reverse Flushing Caps.
  • It has dedicated vacuum pumps that allow Vacuum-Assisted Forward Flushing using Sonic RF Caps, as well as the reverse flushing. The forward pressure can be reduced which makes the recovery process safer for the print heads, while more effective at the same time.
  • Two gauges for monitoring vacuum in the RF cap in the first stage filters.
  • Fine-tuned recovery cycles accommodate various degrees of clogging, types of print heads and inks.
  • The input filters are conveniently located on the side wall and can be replaced in seconds.
  • It automatically reacts to various failures such as pumps overpressure and stalling, pumps and sensors disconnects, or fluid overheating.

Print Head Doctor 13:

  • High pressure of 25 psi helps recover practically any print head using a reverse flushing method.
  • High flow (800ml/min) helps clean print heads with a large number of nozzles, or several print heads at once.
  • Complete control of the machine from Android devices.
  • Automatic pressure control with the digital pressure readout.
  • Fluid cooling and temperature control.
  • Supports Sonic Reverse Flushing Caps.
  • It has dedicated vacuum pumps that allow Vacuum-Assisted Forward Flushing using Sonic RF Caps, as well as the reverse flushing. The forward pressure can be reduced which makes the recovery process safer for the print heads, while more effective at the same time.
  • Two gauges for monitoring vacuum in the RF cap in the first stage filters.
  • Fine-tuned recovery cycles accommodate various degrees of clogging, types of print heads and inks.
  • First stage filters are conveniently located on the side wall and can be replaced in seconds.
  • New design allows ease of service of the main filter and the pumps because they are made as plug-in modules. It takes less than a minute to replace them and you don't need any tools.
  • It automatically reacts to various failures such as pumps overpressure and stalling, pumps and sensors disconnects, or fluid overheating.
  • This machine can be used with HP MF10 cleaning solution for the maintenance and recovery of HP X2 print heads.

Print Head Doctor 12:

  • Complete control of the machine from Android devices.
  • Automatic pressure control with the digital pressure readout.
  • Fluid cooling and temperature control.
  • Supports Sonic Reverse Flushing Caps.
  • It has dedicated vacuum pumps that allow Vacuum-Assisted Forward Flushing using Sonic RF Caps, as well as the reverse flushing. The forward pressure can be reduced which makes the recovery process safer for the print heads, while more effective at the same time.
  • Two gauges for monitoring vacuum in the RF cap in the first stage filters.
  • High capacity pumps provide sufficient pressure and flow even for print heads with a great number of nozzles.
  • Fine-tuned recovery cycles accommodate various degrees of clogging, types of print heads and inks.
  • New design allows ease of service of the main filter and the pumps because they are made as plug-in modules. It takes less than a minute to replace them and you don't need any tools.
  • First stage filters are conveniently located on the side wall and can be replaced in seconds.
  • New design allows ease of service of the main filter and the pumps because they are made as plug-in modules. It takes less than a minute to replace them and you don't need any tools.
  • It automatically reacts to various failures such as pumps overpressure and stalling, pumps and sensors disconnects, or fluid overheating.
  • This machine can be used with HP MF10 cleaning solution for the maintenance and recovery of HP X2 print heads.

Print Head Doctor 11:

  • Complete control of the machine from Android devices.
  • It has dedicated vacuum pumps that allow Vacuum-Assisted Forward Flushing using Sonic RF Caps, as well as the reverse flushing. The forward pressure can be reduced which makes the recovery process safer for the print heads, while more effective at the same time.
  • Three gauges for monitoring pressure and vacuum in the RF cap and in the print head, and a gauge for monitoring the first stage filters.
  • High capacity pumps provide sufficient pressure and flow even for print heads with a great number of nozzles.
  • Fine-tuned recovery cycles accommodate various degrees of clogging, types of print heads and inks.
  • First stage filters are conveniently located on the side wall and can be replaced in seconds.
  • New design allows ease of service of the main filter and the pumps because they are made as plug-in modules. It takes less than a minute to replace them and you don't need any tools.
  • It automatically reacts to various failures such as pumps overpressure and stalling, pumps and sensors disconnects, or fluid overheating.
  • This machine can be used with HP MF10 and MF26 cleaning solution for the maintenance and recovery of HP X2 print heads.

Print Head Doctor 10:

  • Automatic pressure regulation.
  • Control and diagnostics from an Android app.
  • It has dedicated vacuum pumps that allow Vacuum-Assisted Forward Flushing using Sonic RF Caps, as well as the reverse flushing.
  • Fluid heating with a digital temperature control.
  • Digital pressure readout.
  • Maximum pressure 10 psi.
  • The main filter is conveniently located on the side wall and can be replaced in seconds.

Print Head Doctor 9:

  • Control and diagnostics from an Android app.
  • It has dedicated vacuum pumps that allow Vacuum-Assisted Forward Flushing using Sonic RF Caps, as well as the reverse flushing.
  • Fluid heating with a digital temperature control.
  • Pressure gauge.
  • Maximum pressure 10 psi
  • The main filter is conveniently located on the side wall and can be replaced in seconds.

Print Head Doctor Mobile:

  • Automatic pressure control that works similarly to models 12 and 13. Max. pressure: 15 psi
  • Fluid heating: it brings the fluid up to a set temperature and keeps it during the cleaning cycle. Max. temperature: 45°C
  • Digital pressure readout.
  • Two-stage filtration.
  • Rechargeable battery for a cordless operation for up to 30 minutes.
  • Safe for the print heads. Ideally suited for Epson heads cleaning.
  • Easy to carry around using a handle.
  • The waste bottle is housed within the machine.
  • Rugged housing with all components built-in.

Print Head Doctor models 11,12,13,14 technical specifications:

  • Voltage 110V or 220V.
  • Ultrasonic cleaner with electronic control. Sonic power: 50W, heater power: 50W.
  • Tank size: 0.7L (basic model), 1.3L (model "L"), 2.2L (model "XL").
  • Total flow rate up to 1200 ml/min.
  • Max fluid pressure: 10 psi (25 psi for models 13, 14)
  • Max fluid vacuum: -25" Hg
  • Three filters for fluids: two pre-filters (first stage) and one fine filter (second stage). Model 14 has 4 first stage and 2 second stage filters.
  • First stage filter rating: 10 microns (models M, 9, 10, 11) or 5 microns (models 12, 13, 14).
  • Second stage filter raging: 3 microns absolute.
  • Gauges for monitoring of the print head pressure or vacuum, Reverse Flush cap pressure or vacuum, and the condition of first stage filters.
  • Adapters are available for many types of print heads with optional Reverse Flushing (RF) caps, which are available in a Sonic version.
  • Weight 15kg. Model M weighs 5 kg.
  • All recovery fluids are non-regulated for air transport and can be shipped by any courier service.

Check out our Technical Support page for manuals and tutorial videos.

 Recovery Fluids for Print Head DoctorRecovery Fluids can be found here


Videos of Print Head Doctor recovering UV and solvent based print heads
Spectra S-class recovery
Spectra Nova / Galaxy 256 print head recovery with PHD3
Vutek GS / Seiko SPT508 print head recovery
Vutek QS / Seiko SPT510 print head recovery
Toshiba Tec print head recovery with Print Head Doctor 3
Mimaki, Roland, Mutoh, Epson DX4 print head cleaning with Print Head Doctor v2
Konica Minolta KM512 print head recovery with Print Head Doctor v1
Vutek UltraVu 3360 and PressVu 200/600 jetpack recovery with Print Head Doctor v1
See all videos on our YouTube channel

View our image gallery of Print Head Doctor setups for various print heads

Recovery Fluids
Recovery Fluids
36 products
Parts
Parts
6 products

Products

Sort by: Product Price Default
Print Head Doctor 13

Print Head Doctor 13 machine for recovery of solvent, UV and water-based print heads with an automatic pressure control, high flow and high pressure.


Our price: US$3,400.00
Print Head Doctor 14

Print Head Doctor 14 machine for recovery of solvent, UV and water-based print heads with an automatic pressure control, high flow and high pressure.


Our price: US$4,200.00
Print Head Doctor 12

Print Head Doctor 12 machine for recovery of solvent, UV and water-based print heads with an automatic pressure control.


Our price: US$2,850.00
Print Head Doctor 11

Print Head Doctor 11 machine for recovery of solvent, UV and water-based print heads.


Our price: US$1,950.00
Print Head Doctor 10

Print Head Doctor 10 machine for recovery of solvent, UV and water-based print heads, with an automatic pressure control.


Our price: US$1,890.00
Print Head Doctor 9

Print Head Doctor 9 machine for recovery of solvent, UV and water-based print heads.


Our price: US$1,500.00
Print Head Doctor Mobile

Print Head Doctor Mobile machine for recovery of solvent, UV and water-based print heads, with an automatic pressure control.


Our price: US$999.00
PHD-LE Kit

A comprehensive kit for simple and easy to use method of unclogging moderately clogged print heads yourself; includes a print head adaptor and many other components.


Our price: US$299.00
Quantity